Yasuda No.140-SAS AUTOMATIC CAPILLARY RHEOMETER

This tester evaluates the flow feature of molten plastic during the forming process.
The molten test specimen inside the cylinder that is set at a specific temperature will be extruded from the capillary die.
During the extrusion, the shear stress and the shear viscosity is detected to measure the melt viscosity of the test specimen.
The tester is equipped with an automatic cleaning system which enables the operator to continuously run 1 test cycle.
The tester can be chosen between the light load type and the heavy load type according to the test specimen’s maximum load.

Description

Model	No.140-SAS　LIGHT LOAD	No.140-SAS　HEAVY LOAD
Hangings	1 Hanging	1 Hanging
Maximum Load	Max. 10 kN	Max. 20 kN
Load Measuring	Load Cell: Max. 10 kN (Scale 0.1 kN)	Load Cell, Max. 20 kN (Scale 0.1 kN)
Ram Speed	0.5 to 500 mm/min	0.5 to 1,000 mm/min
Capillary Die	φ0.5 to φ2 mm, L/D (To be specified)	φ0.5 to φ2 mm, L/D (To be specified)
Piston	φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm	φ9.510 ± 0.005 mm, L6.35 ± 0.10 mm
Cylinder	Inner φ9.550 ± 0.025 mm, L160 mm	Inner φ9.550 ± 0.025 mm, L200 mmm
Temperature Range	Max. 400 °C	Max. 400 °C
Software	Windows Compatible	Windows Compatible
Accessories	Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench	Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun, Ratchet Wrench
Option	Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor	Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor
Power Source	AC 200 V, 1-Phase, 10 A, 50/60 Hz	AC 200 V, 1-Phase, 10 A, 50/60 Hz
Air Source	0.5 MPa or More	0.5 MPa or More
Dimensions/ Weight (Approx.)	W620 × D650 × H1,170 mm/ 153 kg	W620 × D600 × H1,460 mm, 205 kg